You can apply an acoustic spray ceiling from Acosorb on all semi-covered, water-resistant surfaces. It is suitable for ceilings of swimming pools, residential houses, classrooms, commercial buildings and exhibition buildings. Our acoustic spraying and plastering is a particularly good match with steel roofing sheets, both from an aesthetic and functional point of view.

We also provide walls with an acoustic Acosorb layer. However, preferably above shoulder height. Acoustically absorbing materials are generally porous and therefore vulnerable. In addition, the ceiling surface is more effective.

We cannot treat surfaces that are directly exposed to the weather, such as building facades, with Acosorb products. In addition, livestock sheds, hospital operating rooms and all walkable surfaces such as floors cannot be treated.

The surface must be waterproof, the work floor must be free of obstacles, there must be a connection for tap water within 20 meters of the surface to be sprayed and there must be two separate groups with at least 16 amperes.

Connections such as walls must be ready, as must the plasterwork on walls. Before or after mounting cable trays and/or air ducts. Preferably before, first attach the threaded ends, after which spraying, after which the final assembly of installation parts. This creates a high degree of efficiency with minimal risk of damage. In addition, it is possible to work in an existing environment where the installation has already been installed. All parts that are not to be painted are taped off. It is also possible to spray installation parts, but we advise you to keep cable ducts free. This is to keep it good and easily accessible. After applying the acoustically absorbing layer, the painting and floor finish follow. An exception to this are walls provided with plaster, which must be ready for acoustic spraying before the start. Masking off paintwork can lead to damage.

Yes, of course. If you are interested in an acoustic spray ceiling for your own building or for a building that you are designing or building, you can make an appointment with our account manager.

This differs per project. Normally 60% of the time is spent in the preparation, 20% in the actual spraying process and the last 20% in finishing and cleaning up.

We cannot give an exact drying time. How long this takes depends on the humidity and temperature. Our materials are completely water-based and the ceiling should dry on a natural basis immediately after application. It is important to properly ventilate treated areas. We can stimulate this process by using fans.

The work involved in installing an acoustic ceiling certainly has an impact on the course of business in your company or home. Our acoustic specialists completely tape off the floor and walls that are not sprayed.

That differs per project. Take into account approximately 1 m3 of waste per 100 m2 of surface to be sprayed.

This is usually possible within a period of four weeks. Please contact us for an exact schedule.

Acosorb is available in six different textures, from smooth to coarse-grained.

Several factors influence the degree of sound absorption. The structure has a small influence on this. Factors such as the density and thickness of the Acosorb layer to be applied are decisive for this.

Depending on the desired sound absorption, we coordinate the thickness with you. The thicker the layer, the more absorption. In general, we don't need to apply it thicker than 25mm, because that's how the maximum absorption results are achieved at speech frequencies.

We supply our acoustic products in various standard colors such as Red, Hong Kong Grey, Oman Grey, Ilay Grey, Cool Grey, Black and White. It is also possible to have your own color developed by our specialists. We only apply mass-colored products, so that the background color does not immediately shine through if damaged. This also makes the application more efficient.

Yes, everything can be injected.

This is possible, provided that the electrical pipes are applied without space on the surface and the spraying to be applied is at least 5 mm thicker than the electrical pipe.

Yes, this is possible. However, a border must be placed the thickness of the spraying with a diameter away from the spot. This can be provided by Acosorb by means of a specifically developed Acosorb filling ring or by the client.